Electric insects exterminators

One of the most effective methods of getting rid of flies and other unwanted flying insects is to use a special electric insects exterminators called also fly killers, electric insect exterminators or insect light traps. There are a wide range of models, characterized by working range, attraction, catching performance and appearance / discreetness. As a result, depend on type and model the insect traps can be used quite generally in smaller locations, such as shops, hotels, bars, fast foods or restaurants, as well as the largest facilities, including food processing, production plants and other food sites including warehouses. Our insect light traps are generally divided into two categories: units with glueboards and units with HV electric grids.

All POMEL fly killers are equipped with special UVA lamps, whose task it is to attract all flying bugs. We use only high quality shatterproffed UV-A lamps according to HACCP to prevent possible glass breakage fragmentation and the (mercury) fluorescent powder from entering food / products. Our coatings on UVA tubes ensure also high attraction / radiation efficiency of 95% or more with sufficient strength in case of the event of a glass breakage.

In our fly traps with glueboard the insects are cached and hold with a special “wet pressure sensitive adhesives”. These units are mostly recommended for all places where food is processed , prepared and consumed. Fly killers with glueboards are very silent and conform to HACCP regulations. Additionally, their energy consumption is lower than Bug Zapper units with electric grid.
On the other hand, the glueboards must be replaced at regular intervals or whenever it is necessary.



The fly killers with electric grid are also used to terminate undesirable insects. These devices are only virtually maintenance-free (there is no need to replace glueboards) although bottom trays with dead bugs should be regularly cleaned to keep proper hygienic standards. In general “Electric Zappers” are “not always welcome” in food business due to potential thread of contamination by number of insect exploding particles during electrocution. These fly killers need to highly controlled and critically categorized for any food processing plants.
For this reason the installation and maintenance of electric fly killers with HV grid must be kept carefully to ensure a proper safety distance from open food.

Depending on their size, design type , number and power of UV-A lamps used, our insect exterminators have diverse range – from minimal 30 square meters (perfect for e.g. bars, hotels or shops) up to even 200 m² (for the large production plants, food processing facilities or other industrial buildings).

Different models can be installed using different working mode: hanged from the ceiling, on the wall or free standing.


23 Item(s)

per page

23 Item(s)

per page